Podolsk,
14 Lobacheva st.
To contact page
RU EN
Tue-Fri 11:00-20:00
Sat-Sun 11:00-17:00
Mon - Closed

Budget Sportster Suspension

We really didn't like the suspension on our anniversary 2003 XLH1200 Sportster, so we immediately decided to replace the shocks, and in the process also rework the fork for an oversized brake disc.

When choosing components we went for the cheapest ones that would fit the design and cover the necessary functions: the fork should effectively load the front wheel under braking, and the shocks should have higher energy absorption and be more comfortable.

Fork

To load the front wheel effectively, the fork must have different resistance at different compression speeds. In stock form, resistance is set by the lower holes in the tube and is averaged.

The cheapest way to get separate high-speed and low-speed compression is RaceTech valves/emulators. With them the fork works more effectively in compression in all modes, but otherwise doesn't differ from stock: it still bottoms out and loses stability under heavy load because of oil foaming.

When you buy a RaceTech kit for a specific motorcycle model and a specific weight load, the valves are already preset, and the springs have the right rate. The instructions describe in detail how to set up the valves individually if necessary.

Similar valves are used in all cartridges from big-name brands, but the price is much higher, and nobody makes cartridges for the 2003 Sportster except Progressive Suspension. But the Progressive Suspension cartridge model for the Sportster's 39 mm fork doesn't use a functional valve, and the cartridge works almost unchanged at low-speed compression. The advantage of these cartridges is their monotube design, which provides stability and energy absorption, resistance to bottoming out and comfort on bad roads.

Shocks

The cheapest shocks on the market are the Progressive Suspension 412 series. They have a twin-tube design, like the originals, so under heavy load (long rides on bad roads) they work inconsistently, pitch and bottom out on hard impacts. Nevertheless, they have a larger-diameter damper, spring and rod (higher energy absorption) and a functional valve like the RaceTech Gold Valve.

For our Sportster such shocks are quite sufficient in terms of function, since the motorcycle is not for daily commuting but for comfortable riding for pleasure. The difference from stock is substantial, and the design fits perfectly.

In the instructions from Progressive Suspension (as in those of other brands) for 13.5-inch shocks, the recommended length under full load (motorcycle, rider, gear, luggage) should be 12.25 inches, that is, a sag of 1.25 inches.

Our sag turned out even less at the minimum preload value. The shock feels a bit soft and compresses slightly under the motorcycle's weight, so we increased the preload and made the sag even smaller. After testing we will compare it with its closest competitor in price, the Bitubo WME.

In our shop you can get advice and buy and install components from leading brands for Harley-Davidson motorcycles.

Recommend
Magazine Sportster XLH1200 Tire Fitting Magazine Free Ride Session 2026 Great Harley Stunts Magazine Street Glide Arlen Ness Fork