Podolsk,
14 Lobacheva st.
To contact page
RU EN
Tue-Fri 11:00-20:00
Sat-San 11:00-17:00
Mon - Day off

How to Drift a Motorcycle

A drift is controlled movement with the rear wheel spinning, without using the front brake. Drifting is one of the most dangerous tricks in stunt riding. A mistake can lead to a highside, which throws the rider out of the seat as if from a catapult. Freestyle Stunt Band pro riders Nikita Podolya and Vitaly Pasevich shared their own experience of how to master drifting as safely as possible.

Motorcycle

The motorcycle must have good side protection: a cage, a subcage and pegs on the wheel axles. Street or sport touring tires are used on the rear wheel. Don't fit sport tires. The pressure should be at least two atmospheres. Suspension setup is very important. On the rear shock, maximum preload, maximum compression and medium rebound are usually set. The fork has similar values. The settings are individual, and it's important to find the optimal ones that suit all tricks, not just drifting.

Locking the rear wheel

A drift starts with locking the rear wheel, so first you need to learn to lock it confidently. To do this, just press the rear brake pedal sharply and hard while riding straight. Try not to release the brake until you come to a complete stop. Once you've mastered the lock, try sliding the bike 90 degrees with maximum lean at the end of the braking distance.

Breaking the rear wheel loose

To break the rear wheel loose, at the 90-degree slide, at the moment of maximum lean, open the throttle 50% and dump the clutch. It's very important not to close the throttle sharply after the wheel breaks loose. Closing the throttle sharply will cause a highside. If you lose control, it's better to go into a lowside by adding throttle.

Drift

Moving in a drift is the right balance of throttle and lean. The circle radius is controlled by countersteering and throttle. If the handlebar is at full lock against the stop, you need to exit the drift, gradually reducing the throttle to avoid a highside.

Exiting the drift

To exit a drift, smoothly close the throttle and straighten up. At shows pro riders often exit a drift from a large radius on increasing throttle. This is needed to gain speed faster for the next trick. While learning, you can exit into a lowside if you can't close the throttle smoothly and the motorcycle is being thrown into a highside.


Some people learn on a wet surface, since it's easier to break the rear wheel loose there. When moving to dry asphalt, keep in mind that you will have to lean the motorcycle more and open the throttle 10–20% more.

Always wear a full set of riding gear when training!


Drifting is not only one of the most spectacular tricks but also the most useful in terms of motorcycle control skills. Being able to control the rear wheel breaking loose and sliding is useful for any rider, since everyone has to ride in the rain and on dusty, dirty roads.

Recommend
Magazine Ouest Bike Show 2019 Magazine Czech Stunt Days 2019 French Stunt Style Romain Jeandrot