Wheelie: Chris Pfeiffer's Instructions
One of the best stunt riders in the history of the sport shared simple but effective truths about how to wheelie.
1) Seated position. Roll slowly in first gear. Your right foot is ready to press the rear brake. Then snap the throttle shut and shift your body weight forward. The fork compresses a little.
2) At the next moment, as the fork rebounds, shift your body weight back to the starting upright position and pull the handlebar toward you. At the same time open the throttle (power wheelie) or dump the clutch (clutch wheelie, for lifting heavy or low-powered motorcycles).
Attention: Use only one finger to pull the clutch; the others are needed to hold the handlebar. Your right foot is ready to press the brake. This is your insurance.
3) After a while, try to get closer to the balance point (shown in the photo) using the throttle and rear brake. The balance point is reached when you can ride on the rear wheel at a constant speed without accelerating. That is your goal! Control your direction by balancing your body left and right. If you go past the balance point, don't panic: close the throttle and press the rear brake, and the motorcycle will come down. Don't press the brake hard, as the motorcycle will slam down onto the front wheel and you may lose control.
4) Before landing, give it some throttle to soften the front wheel landing and prevent a hard jolt through your arms.
Note:
Don't practice on public roads. Find an empty lot. You will be fully concentrated on the wheelie and will have no attention left for the traffic situation. Use the rear brake! A controlled wheelie is a combination of throttle and rear brake. Don't forget to train in full riding gear!